Product
- Detachable plate heat exchanger
- Domestic plate heat exchanger seal gasket
- Semi welded plate heat exchanger
- Brazed plate heat exchanger
- Welded plate heat exchanger
- Detachable frame
- Heat recovery / heat exchange unit
- Plate heat exchanger hydraulic press
- Non standard customized steel wire winding hydraulic press
- Steel wire winding hydraulic bottoming machine for cookware
- Wire winding machine
- Wire winding for external processing
- Ultra high pressure hydraulic press
- Ultra high pressure hydraulic valve
- Ultra high pressure oil cylinder
Hot news
Wire winding for external processing
Operation method for external processing of wire winding machine
1、 Check if the winding machine is in the initial position. If it is in the initial position, start placing the goods on the turntable and fixing the winding film on the goods. At this time, you can activate the automatic operation button. If it is not in the initial position, please run to the initial position.
2、 According to the actual situation, set the number of layers for the winding machine to wrap the goods and the number of layers for the bottom and top. After setting, start the automatic operation button. At this time, the winding machine turntable slowly accelerates to the preset speed, and the winding film automatically wraps with the turntable. At the same time, the turntable counts. When the bottom set winding layer is reached, the film frame starts to rise.
3、 When the mold frame of the winding machine rises to a position where the photoelectric switch cannot detect it, the film frame stops rising and begins to descend. The number of up and down cycles is counted once, and the winding machine completes all the winding and packaging work. At this point, the operator only needs to manually cut off the winding film and then use tools to transport the goods away.
2、 According to the actual situation, set the number of layers for the winding machine to wrap the goods and the number of layers for the bottom and top. After setting, start the automatic operation button. At this time, the winding machine turntable slowly accelerates to the preset speed, and the winding film automatically wraps with the turntable. At the same time, the turntable counts. When the bottom set winding layer is reached, the film frame starts to rise.
3、 When the mold frame of the winding machine rises to a position where the photoelectric switch cannot detect it, the film frame stops rising and begins to descend. The number of up and down cycles is counted once, and the winding machine completes all the winding and packaging work. At this point, the operator only needs to manually cut off the winding film and then use tools to transport the goods away.
蘇公網安備32028102001776